DC-E25 silicon gel for sealing
Category: Electronic Potting Silicone   Publish Time: 2018-08-23 14:05 
Silicon gel has high transparency.you can see the electrical parts detail after you pouring the silicone gel in it.

Description

DC-E25 RTV-2 Silicone Potting Component is a newly silicone rubber material of sealing compounds.
It cures with no heat, no corrosion and very low shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.

 

 

Application of DC-E25 silicon gel for sealing

DC-E25 RTV-2 Silicone Potting Component is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

Technical Parameters of DC-E25 silicon gel for sealing

 

 

Operation instructions of DC-E25 silicon gel for sealing

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time: When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

 

 

Warm tips of DC-E25 silicon gel for sealing:

1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.

Condensation silicone which not completely cured or organic tin compounds

Sulphur, sulfide and sulfur rubber materials.

Amine compounds as well as contains the amine materials.

Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix it evenly before using, it does not affect the performance.

 

Package of DC-E25 silicon gel for sealing

18KG/drum vacuum packing for part A + 18KG/drum vacuum packing for part B

25KG/drum packing for part A +25KG/drum packing for part B 

200KG/drum packing for part A +200KG/drum packing for part B  

 

 

 

Shelf life

1. Eighteen(18) months from date of shipment when stored at 25C in original unopened packages.

2. This kind of product is non-dangerous product, it can be transported as general chemicals.

3. Products exceed the storage life should be confirmed normal before using.

 

 



  Next: Electronic Potting Silicone
 
QQ  QQ
Skype